Bone Marrow Biopsy: Why It's Done and What to Expect

Bone Marrow Biopsy: Why It's Done and What to Expect

Bleeding from the sample site that soaks through a dressing, or a fever after the test, needs emergency care. Call 911 or go to the emergency department.

What is bone marrow aspiration?

Bone marrow aspiration is a procedure in which a trained clinician passes a needle through the hard outer shell of a bone and withdraws a small volume of the liquid marrow inside, so that a laboratory can look at the cells that make blood.

Marrow is the soft tissue that fills the inner spaces of certain bones. It is where red blood cells, white blood cells and platelets are produced before they enter circulation. A routine blood count measures finished cells that have already reached the bloodstream. An aspirate looks one step further back, at the cells still being built, at the proportions of each cell line, and at whether those cells are maturing in an orderly way.

Once the liquid is drawn, drops of it are spread across glass slides to make smears, which are then dried, stained and read under a microscope. Research suggests that the aspirate is particularly well suited to examining the fine detail of individual cells, because a thin smear separates them enough to judge size, shape and stage of maturity 1. That level of cellular detail is difficult to obtain any other way.

In most sittings the aspirate is only half the job. A second needle takes a solid cylinder of bone with the marrow still inside it, called a core or trephine sample. The liquid and the solid sample answer different questions, which is why a single appointment often produces both. The person reading the slides is a pathologist or haematologist, and the report they write goes back to the clinician who ordered the test.

What is the difference between the liquid aspirate and the core sample?

The aspirate is liquid marrow examined cell by cell, while the core is a solid piece of bone and marrow examined as intact tissue, so the two show different things about the same place.

Feature Liquid aspirate Core (trephine) sample
What is collected A small volume of liquid marrow drawn into a syringe A solid cylinder of bone with the marrow inside it
How it is prepared Spread on slides as smears, then dried and stained Fixed, decalcified, cut into thin sections and stained
What it shows best Fine detail of individual cells, their proportions and their maturity 1 Overall cellularity and the architecture of the marrow space, including how cells sit in relation to bone and fat 2
Typical add-on work Fluid can be divided for cell sorting, chromosome analysis and molecular tests Extra stains can be applied to the tissue sections, including stains for fibrous tissue
Main limitation Can be diluted by blood, or may not flow at all if the marrow is fibrous or densely packed Takes longer to process because the bone must be softened before it can be cut

Studies suggest that the core sample is what allows a reader to judge the overall structure of the marrow and the balance of cells, fat and bone across a continuous piece of tissue 2. The aspirate cannot do that, because the act of drawing it apart destroys the arrangement. Equally, the core is a poor place to examine the fine features of a single cell. Read together, they cover each other's blind spots, and that is why clinicians ask for both rather than choosing between them.

Why might a clinician order marrow sampling?

Marrow sampling is ordered when something in the blood, or in a person's symptoms, points to a question about how blood cells are being produced, destroyed or stored, and the answer is not available from a blood sample.

Reasons a clinician may reach for this test include the following, listed without any ranking.

A marrow sample does not stand alone. It is interpreted next to the blood count, the blood smear, imaging, and the person's history and examination. The clinician who ordered the test decides what the combined picture reflects.

Which part of the body does the sample come from?

In adults the sample is usually taken from the back of the hip bone, at the bony ridge you can feel low on either side of the lower back above the buttock 3.

That site is used because it is a broad flat bone with a generous marrow space, it sits close to the skin surface so the needle path is short, and there are no major organs behind it. The person lies on their side with knees drawn up, or face down, and the area is cleaned and covered with a sterile drape. Only a small window of skin is left exposed.

Other sites are used in particular situations, and the clinician performing the test chooses based on the person in front of them, their body shape, previous procedures and what the sample is needed for 3. If someone has had radiation to one hip, for example, the other side may be chosen. The front of the hip bone is an option when lying face down is not possible.

Nothing is taken from the spine, and nothing is taken from the spinal fluid. Marrow sampling and a lumbar puncture are completely different procedures, a point worth clarifying with the team if the two have been mentioned in the same conversation.

Is bone marrow aspiration painful?

Expect pressure and a short, deep ache rather than a sharp cutting pain, and expect the experience to differ from one person to the next.

The sequence usually feels like this. First the area over the bone is numbed, which people describe as a sting followed by a spreading cold or heavy sensation. Numbing works well on the skin and the tissue down to the bone surface. The inside of the bone cannot be numbed in the same way, so the part people remember is the moment the liquid is pulled into the syringe, which is often described as a strong, deep, pulling ache that travels briefly down the back of the leg or across the hip. It is short. When a core is also taken, people usually report pressure and a grinding or pushing sensation rather than pain.

Things that make a difference are worth asking about before the day. Tell the clinician if you are anxious about procedures, if numbing has worked poorly for you in the past, or if you have had this test before and found it hard. Some centres offer additional comfort measures, and a licensed provider evaluates whether those are appropriate for you. Say something during the procedure if a sensation is sharp rather than deep, because the person performing the test can pause and respond.

Afterwards, soreness and bruising at the sample site are common. Pain that increases rather than easing, or that stops you moving normally, should be reported to a clinician.

How is the procedure carried out, step by step?

The procedure follows a consistent sequence, and knowing it in advance removes most of the surprise 3.

The sampling itself is brief, while the appointment as a whole is longer because of consent, positioning and observation. Ask the team how long to plan for, since it varies by centre and by what is being collected.

Who is qualified to perform the test?

Marrow sampling is performed by clinicians who have completed specific training in the technique and have had their competence formally assessed, which in practice includes doctors and other trained practitioners.

In hospital haematology and oncology services, the person holding the needle may be a physician, a specialist trainee, a physician associate or an advanced practice nurse, depending on how that service is organised. Research suggests that registered nurses who have completed structured training and competency assessment perform bone marrow aspiration and biopsy as part of established clinical practice in some settings 4. What matters is documented training and ongoing practice, not the job title on the badge.

In some centres the procedure is done in a radiology department with imaging to guide the needle, which is more likely when anatomy is difficult or a previous attempt did not yield a sample. Scan preparations are not usually part of a routine marrow sampling appointment.

It is entirely reasonable to ask who will be performing the test, how often they do it, and whether anyone is supervising. Teams expect that question and answer it without offence.

How do you prepare for the appointment?

Preparation is mostly a conversation rather than a list of restrictions, and the single most useful thing you can do is give the team a complete picture of your medicines and bleeding history.

Things to tell the team before the day.

Things to ask.

Wear loose clothing that is easy to move away from the lower back, and plan a lighter day afterwards rather than a heavy one. Treatment decisions, including anything to do with your usual medicines, belong to a licensed provider.

What happens to the sample after it leaves the room?

The aspirate and the core take separate routes through the laboratory, and that is why parts of a report can arrive at different times.

Smears made at the bedside are dried, stained and examined for the proportions of each cell line, the maturity of those cells, and the presence of any cells that do not belong. Additional stains can be applied, including a stain that shows iron held within the marrow. Studies indicate that aspirate fluid can also be analysed on automated blood cell counters in the laboratory, which adds a numerical description of the cells in the sample 5.

Portions of the liquid are often divided off for further tests. These may include sorting cells by their surface markers, examining chromosomes, and molecular tests that look for specific genetic changes. Each of these runs on its own timetable.

The core sample follows a slower path. It is fixed in preservative, then decalcified so the bone becomes soft enough to cut, then embedded, sliced into thin sections, mounted and stained. Only then can the pathologist assess cellularity and the structure of the marrow space. Because decalcification cannot be rushed, the core report generally follows the aspirate report rather than arriving with it.

What can make a sample hard to collect or hard to read?

Several technical factors can limit what a marrow sample shows, and most of them are decided before the slides ever reach a microscope.

A dry tap is the term used when little or no liquid marrow can be drawn. It can happen when the marrow is fibrous or densely packed with cells, and it is a finding in its own right rather than a failure. When it happens, the core sample carries most of the information.

A heavily blood diluted aspirate is another limitation. If the drawn liquid contains a large proportion of ordinary circulating blood, the proportions seen on the smear do not represent the marrow well. Drawing a small volume for the smears, rather than a large one, reduces this.

The core has its own vulnerabilities. A short or fragmented cylinder gives less tissue to assess. Crushing during collection distorts the cells. Processing steps, including how long the tissue sits in decalcifying solution, can change how structures appear under the microscope. Research suggests that errors in reading a trephine biopsy frequently trace back to the quality of the sample and how it was processed, rather than to the reading itself 6.

Finally, a sample represents one small area. Disease that sits in patches may not be present in the piece that was taken, which is one reason a clinician may repeat sampling or ask for it from the other side.

What does the report describe, and when do results come back?

The report describes what the laboratory saw, in structured terms, and leaves the interpretation to the clinician who ordered the test.

Typical elements include overall cellularity, meaning how much of the marrow space is occupied by blood-forming cells rather than fat, the relative proportions of the red cell, white cell and platelet lines, whether cells are maturing in an orderly sequence, whether any cells are present that would not normally be there, the amount of iron held in the marrow, and whether fibrous tissue has increased. A description of normal marrow architecture is what the reader compares against 2.

Turnaround varies by laboratory and by which additional tests were requested, and the core and the add-on tests usually follow the aspirate rather than arriving with it. Ask the team performing the test when and how you will hear, and who will go through it with you, rather than planning around a fixed date.

One point about wording. A marrow report does not, on its own, say that a person has a condition. It describes findings. A value or a finding outside what the laboratory prints as its own range is worth discussing with a clinician, who decides what it reflects in the context of your blood counts, symptoms, history and other tests. If anything in a report is unclear, ask for it to be explained in plain words.

What are the risks, and what needs urgent attention?

Marrow sampling is an invasive procedure with a short list of recognised complications, and research suggests that serious complications are uncommon when standard technique is used 3.

What people commonly notice afterwards includes soreness at the site, bruising, and a small amount of blood on the dressing. Less commonly, bleeding can continue, the site can become infected, or structures near the bone can be irritated. Bleeding risk is higher in people with clotting disorders or very low platelet counts, which is exactly why the team asks about those beforehand.

Call 911 or go to the emergency department if any of the following happen after the test.

For anything milder but still concerning, such as a dressing that keeps lifting or soreness that is not easing as you expected, contact the team that performed the test and ask for advice.

How does hemoglobin relate to marrow testing?

Hemoglobin is the oxygen carrying protein inside red blood cells, reported on a standard blood count, and a value below the printed range is one of the findings that can lead a clinician to look at marrow production. Hemoglobin covers what the marker measures, how it is tested and how to read a result.

FitScript's optimal range for hemoglobin is 14 to 16 g/dL for men and 12 to 15 g/dL for women, which is an optimization target rather than a diagnostic cut-off. Your laboratory's own range appears as printed on your lab report, and ranges vary by laboratory, age and sex.

A value outside the printed range is worth discussing with a clinician, who decides what it reflects and whether any further test is needed.

Which other tests usually sit alongside this one?

Marrow sampling almost never happens in isolation, because the decision to do it is usually built on a stack of simpler tests first.

The starting point is a complete blood count with a differential, which separates the white cells into their types, together with a manual review of the blood smear. A reticulocyte count adds information about how many young red cells are leaving the marrow. Iron studies, including ferritin, and vitamin B12 and folate measurements cover nutritional inputs to blood cell production. Kidney and liver panels, thyroid markers and inflammatory markers such as CRP are often checked because production of blood cells responds to what is happening elsewhere in the body. Those markers are reported in the units your laboratory uses, against the range printed on your lab report.

When a specialist is considering marrow sampling, imaging and further blood tests may be arranged in parallel so that the whole picture arrives at once rather than in pieces.

For people simply trying to understand their own blood work rather than investigate a specific problem, broad routine panels are the practical starting point. A labs-first membership such as FitScript includes 150+ biomarkers tested per year, with interpretation by Atlas, its AI health advisor. Routine markers describe patterns over time. They do not replace a specialist assessment, and a clinician decides whether any invasive test is warranted.

When should you talk with a clinician?

Talk with a clinician whenever a blood count sits outside the range printed on your lab report, whenever a result changes noticeably from your previous ones, or whenever symptoms do not match what the numbers are showing.

Symptoms worth raising promptly include unusual tiredness that does not improve with rest, breathlessness on effort that is new for you, bruising or bleeding that happens more easily than it used to, repeated infections, drenching night sweats, unexplained weight loss, bone pain, or a fever that keeps returning without a source. None of these points to a single answer, and none of them should be interpreted at home. They are reasons to be examined.

If marrow sampling has been suggested, useful questions are what the team is looking for, what they would do differently depending on the answer, whether a liquid sample, a core or both will be taken, and what the alternatives are. If you have already had the test, ask who will explain the report and what the next step is once the add-on tests are back.

The information here is educational and not medical advice. Discuss your results, your symptoms and any proposed procedure or treatment with a clinician or licensed provider who knows your history, and let them decide what is appropriate for you.

Key takeaways

References

  1. Bone marrow aspiration. Journal of Clinical Pathology, 2001.
  2. The bone marrow trephine biopsy: a review of normal histology. Histopathology, 1993.
  3. Bone marrow aspiration and biopsy: techniques and practice implications. Skeletal Radiology, 2022.
  4. Bone Marrow Aspiration and Biopsy Performed by RNs: A Review of Clinical Practice. The American Journal of Nursing, 2019.
  5. Analysis of bone marrow aspiration fluid using automated blood cell counters. Clinics in Laboratory Medicine, 2015.
  6. Pitfalls in bone marrow pathology: avoiding errors in bone marrow trephine biopsy diagnosis. Journal of Clinical Pathology, 2011.

Common questions

How long does the appointment take?

The sampling itself is brief, while the appointment as a whole is longer because it includes consent, positioning, pressure on the site and a period of observation. Timing varies by centre and by whether a core sample is taken as well as the liquid. Ask the team how long to plan for when your appointment is booked.

Will I be asleep during a bone marrow test?

Most people are awake, with the area over the bone numbed first. Some centres offer additional comfort measures, and a licensed provider evaluates whether those are appropriate for you. Raise it before the day if you are anxious about procedures or have found numbing unreliable in the past.

Can I drive myself home afterwards?

It depends on what comfort measures are used, so ask when the appointment is arranged rather than assuming. If anything that affects alertness is planned, you will be told to bring someone with you. Plan a lighter day afterwards either way, since the site is usually sore.

What is the difference between an aspiration and a biopsy?

An aspiration draws liquid marrow into a syringe, and a biopsy takes a solid cylinder of bone with the marrow inside it. The liquid shows the detail of individual cells, while the solid core shows the structure of the marrow space. They are frequently taken in the same sitting, through the same small opening in the skin.

Does the test leave a scar?

The needle goes through a small puncture in the skin, which is covered with a dressing before you leave. Bruising around the area is common. Ask the team how to care for the site, when the dressing can come off, and when you can shower or bathe.

Can the test be repeated?

Yes. Repeat sampling is sometimes needed to follow how a marrow condition changes over time, or because a first attempt produced too little material to read properly. The clinician looking after you decides whether a repeat is warranted and when.

What should I watch for once I am home?

Call 911 or go to the emergency department if bleeding soaks through the dressing, if you develop a fever, if pain becomes severe or keeps worsening, or if you notice spreading redness, swelling or discharge at the site. The same applies to new numbness or weakness in the leg on that side, or feeling faint or short of breath. For milder concerns, contact the team that performed the test.

If my blood count is normal, do I still need marrow sampling?

A blood count describes the cells already circulating, which is not the same as describing how they are being made, so a normal count does not by itself answer every question about the marrow. The decision rests on your symptoms, your history and the full set of tests, not one result. Your clinician decides whether marrow sampling would change what happens next.

Related reading