Most resting scans are done by a sonographer with a handheld probe and gel, while you lie on your left side. A clinician then reads the images and the numbers together before anything is decided.
A resting heart ultrasound measures four things in one sitting, how strongly the heart muscle squeezes, how the four valves open and close, how big the chambers are and how thick their walls are, and whether fluid has gathered in the sac around the heart. Almost everything else in the report is detail built on top of those four.
The standard version is called transthoracic, because the probe sits on the outside of the chest and looks through the gaps between the ribs and under the breastbone. From a handful of standard positions, the sonographer collects moving pictures of the heart from several angles, so that each chamber and each valve is seen more than once.
Alongside the grey-scale moving images, the machine uses Doppler. Colour Doppler paints moving blood onto the picture so leaks and turbulence become visible. Spectral Doppler measures how fast blood is travelling through a valve or an outflow tract, which is how narrowing and leaking are graded. Tissue Doppler measures the speed of the heart muscle itself as it relaxes, which is central to the filling part of the assessment.
The measurements are not improvised. Chamber quantification guidance from the American Society of Echocardiography and the European Association of Cardiovascular Imaging sets out which views, which borders and which calculations should be used for volumes, wall thickness and ejection fraction, so that reports are comparable between laboratories and over time 1.
The probe sends high-frequency sound pulses into the chest and listens for the echoes that bounce back from tissue boundaries. The machine times each returning echo and converts it into a dot of brightness at the right depth, rebuilding the whole picture many times per second, which is why the heart appears to move in real time rather than as a still photograph.
Doppler adds motion information. When sound reflects off moving red blood cells, its frequency shifts slightly, and the size and direction of that shift tell the machine how fast the blood is moving and which way it is going. That is the physics behind a colour jet of a leaking valve and behind the velocity tracings printed in the report.
The gel matters more than it looks. Air is a poor conductor of ultrasound, so the gel removes the thin layer of air between the probe and your skin. For the same reason, picture quality depends on your anatomy. Air in the lungs, rib spacing, chest shape and body composition all affect how much of the heart can be seen from the surface. When the picture is hard to interpret, a clinician may add a scan preparation given through a vein to outline the inner border of the left ventricle more clearly, and a licensed provider decides whether that is appropriate.
No radiation is involved at any point, which is one reason the same person can be scanned repeatedly over years to follow a change.
Ejection fraction is the percentage of the blood sitting in the left ventricle at the end of filling that is pushed out with the next beat. The machine or the reader measures the volume of the chamber when it is fullest and again when it is emptiest, and reports the difference as a percentage.
It is a fraction, not a total. A heart can pump a normal percentage of a small volume, or a reduced percentage of a large one, which is why volumes are reported next to the percentage. Chamber quantification guidance describes the preferred method, tracing the inner border of the chamber in two different views and combining them, and sets out how values should be indexed and reported 1.
Many laboratories regard roughly 50 percent or above as the normal range for adults, with the exact lower limit differing by sex and by the method used. Reports usually place the result in a band, preserved, mildly reduced, moderately reduced or severely reduced, rather than treating one decimal point as meaningful. A difference of a few percent between two scans is often measurement variation rather than a real change.
The number is also incomplete on its own. Research suggests that symptoms of heart failure occur in people whose ejection fraction is in the normal range, which is why filling measurements are assessed alongside the pumping percentage rather than after it 2. So the observation is a percentage, the meaning depends on chamber size, filling and symptoms together, and the next step is a conversation with the clinician who ordered the scan.
For each of the four valves, the scan answers two questions, is it opening widely enough and is it closing tightly enough. A valve that does not open fully is described as stenotic, and a valve that lets blood run backwards is described as regurgitant. A valve can do both at once.
Two-dimensional imaging shows the leaflets themselves, how many there are, whether they are thickened, calcified, floppy or tethered. Colour Doppler shows backward flow as a jet behind the closing valve, and the width and depth of that jet contribute to grading. Spectral Doppler measures how fast blood accelerates through a narrowed valve, and from that speed the report calculates a pressure gradient and, for some valves, an estimated opening area.
Severity is usually graded as trace, mild, moderate or severe. Small amounts of backward flow across some valves are a common finding in people with otherwise normal hearts and often carry no symptoms, which is why a report mentioning trivial regurgitation is not the same as a report describing a significant leak.
What a clinician does with valve findings depends on severity, on the size and function of the chamber behind the valve, and on symptoms. Mild findings are often simply followed with a repeat scan at an interval the clinician chooses. More significant findings lead to closer follow-up or referral. Any decision about management belongs to a licensed provider who has seen the whole picture, not to the image alone.
Chamber size and wall thickness record how the heart has adapted over time, which is why they often tell a longer story than a single beat does. Pressure and volume loads leave structural fingerprints, and the scan measures them directly.
The left ventricle is measured for internal diameter, for the thickness of the septum and the back wall, and for calculated mass. Thicker walls with a smaller cavity point one way, a dilated cavity with thin walls points another, and the report usually names the pattern rather than drawing a conclusion from it. The left atrium is measured by volume rather than a single diameter, because it enlarges in more than one direction.
Size is interpreted relative to the person, not in absolute terms, so most measurements are indexed to body surface area before being compared with reference values. Chamber quantification guidance specifies which measurements should be indexed, which views they should come from and how normal limits differ by sex 1.
For most people, the practical value is the trend. One scan gives a position, two scans a year or more apart give a direction. Athletic training, long-standing high blood pressure, valve disease and previous heart muscle injury all shape these numbers, and some medicines also influence the loading conditions the heart works against, which is a question for your prescriber rather than something to infer from the report.
Diastolic function describes the filling half of the heartbeat, how easily the left ventricle relaxes and how much pressure is needed to fill it. A ventricle that squeezes normally but has become stiff still struggles to accept blood, and that stiffness is what the diastolic section of the report tries to characterise.
Several measurements are used together. Mitral inflow velocities describe how quickly blood crosses from the atrium into the ventricle in early filling and again with the atrial kick. Tissue Doppler measures how fast the muscle at the base of the ventricle moves as it relaxes. Dividing one by the other gives a ratio that is used as an indirect marker of filling pressure. Left atrial volume and the peak velocity of any tricuspid regurgitation jet complete the set.
Research suggests that no single measurement describes filling pressure reliably on its own, which is why recommendations combine mitral inflow, tissue Doppler velocities, left atrial size and tricuspid regurgitation velocity into one algorithm 3. The same recommendations were published jointly in the European imaging literature, with the same multiparametric approach 4. An updated statement describes how those measurements are applied in the assessment of heart failure with preserved ejection fraction 2.
Some laboratories also report left atrial strain, a measure of how much the atrial wall stretches and recoils through the cardiac cycle. Studies indicate that reported normal values for left atrial strain vary across populations and measurement methods, so the number is read against the reference data the laboratory uses 5.
The right side of the heart gets its own section because it behaves differently from the left and cannot be assessed with the same measurements. The right ventricle wraps around the left in a crescent shape, so a simple two-dimensional outline underestimates it, and the report instead uses several targeted measures.
Typical ones include how far the base of the right ventricle moves towards the apex during a beat, the tissue Doppler velocity at the same point, a measure of area change, and the size of the right atrium. From the velocity of any tricuspid regurgitation, combined with an estimate of right atrial pressure taken from the size and breathing behaviour of the inferior vena cava, the report can give an estimated pulmonary artery systolic pressure.
Dedicated guidance for right heart assessment sets out which views and measurements should be reported, and recommends using more than one of them rather than relying on a single index, with additional considerations when raised pulmonary pressures are suspected 6.
The practical point for a reader is that an estimated pressure is an estimate. It depends on image quality, on the angle the Doppler beam makes with the jet and on the assumptions used for right atrial pressure. A single raised estimate is an observation worth discussing with a clinician, not a conclusion, and it is often repeated or followed with other tests before anything is decided.
The heart sits inside a two-layered sac, and a small amount of lubricating fluid between the layers is normal. The scan reports that space because it is one of the few things an ultrasound can see instantly and because the amount of fluid, and the speed at which it collected, changes what it means.
Small collections are often found incidentally and may simply be measured and followed. The report usually describes the size, where the fluid sits and whether it is spread evenly around the heart or pooled in one area.
Volume alone is not the whole story, because the sac can stretch slowly but not quickly. A large effusion that collects rapidly is associated with compression of the heart's chambers, and echocardiography is the main bedside tool used to recognise that pattern, which includes chamber collapse during the cardiac cycle, a dilated inferior vena cava and exaggerated respiratory variation in flow across the valves 7.
If a report mentions a moderate or large pericardial effusion, that is worth discussing with a clinician promptly rather than at a routine follow-up. Breathlessness that comes on quickly, light-headedness or a racing heart alongside such a finding should prompt urgent medical attention. Never set aside an abnormal result because you feel well on the day you read it.
A resting scan is painless, and most people describe it as firm pressure with cool gel rather than discomfort. You undress to the waist, put on a gown, and lie on your left side with your left arm up, which rotates the heart towards the chest wall and opens the gaps between the ribs.
Small electrodes are usually stuck to the chest so the machine can record a simple heart tracing alongside the images, which tells it where each beat begins. The sonographer moves the probe between a handful of standard positions, presses firmly at times, and asks you to breathe in, breathe out or hold your breath briefly, because lung air moves in and out of the way with each breath.
The room is often dimmed so the screen is easier to read, and you will hear whooshing sounds when Doppler is switched on. That noise is blood flow, not a problem.
A standard resting scan commonly takes roughly 30 to 45 minutes, though it varies with how easy the images are to obtain and how many measurements are requested. No fasting is needed for a routine resting scan, and you can usually take your normal medicines, though your prescriber is the person to ask if you are unsure. Bring a list of what you take and wear a two-piece outfit so only the top needs to come off.
A clinician adds another form of the test when the resting pictures leave a specific question unanswered, usually about how the heart behaves under load or about a structure the chest wall view cannot show clearly.
A stress scan images the heart at rest and again while the heart is working harder, either with exercise on a treadmill or bike or with a method of raising the heart's workload chosen and supervised by the clinician, so that wall motion and valve gradients can be compared between the two states.
A swallowed probe scan, often called a transoesophageal scan, places a small probe into the gullet after the throat is numbed and sedation that a clinician decides on, giving a much closer view of the valves, the left atrium and prosthetic hardware because there is no rib or lung in the way.
There is also a version used inside the operating room. A review of adult intraoperative practice describes how echocardiography is used during cardiac surgery to assess ventricular and valve function before and after a repair, so findings can change what happens while the chest is still open 8.
None of these replaces the resting scan. They answer narrower questions, carry different preparation requirements, and a licensed provider evaluates whether any of them is appropriate for a given person.
The scan is usually ordered when a symptom or an examination finding points towards the heart's structure rather than its rhythm. Breathlessness on exertion or when lying flat is one of the most common reasons, because the scan separates a pumping problem, a filling problem and a valve problem, which feel similar from the outside.
Swelling in the ankles and lower legs is another frequent trigger, particularly when it is new, worse in the evening and present in both legs. Swelling has many causes outside the heart, and the scan is one way of answering whether the heart is contributing.
Other common reasons include a murmur heard during an examination, palpitations with other features that concern the clinician, chest discomfort being worked up alongside other tests, fainting, an abnormal heart tracing, follow-up of a known valve or heart muscle condition, and checking the heart before certain planned procedures.
It is also used to follow something already known. When a valve leak or a chamber measurement has been recorded once, the useful question becomes whether it is stable, and that is answered by comparing scans done with the same method at intervals a clinician chooses.
If symptoms are new, worsening quickly, or occur at rest rather than on exertion, that is worth raising with a clinician promptly rather than waiting for a routine appointment.
A heart ultrasound cannot see inside the coronary arteries, so it does not show whether those arteries are narrowed. It can show the consequences, a segment of muscle that moves less than its neighbours, but a normal resting scan does not rule out coronary narrowing, and that question is answered with other tests a clinician selects.
It is also a poor rhythm test. It captures a short window of beats, so an intermittent rhythm disturbance can easily happen outside the scan. A heart tracing or longer monitoring is the right tool for that question.
Image quality is a real limit. Lung air, chest shape and body composition all affect how much of the heart can be seen from the surface, and when the border of the chamber cannot be traced confidently, calculated values such as ejection fraction become less precise. Measurements also depend on the person acquiring them and the person reading them, which is part of why small differences between scans are interpreted cautiously.
Finally, it is a snapshot of structure and flow at one moment, under the conditions of that moment. Hydration, heart rate, blood pressure and recent exertion all shift the numbers. None of this makes the scan unreliable. It means the report is read next to symptoms, examination and blood markers rather than alone.
Hemoglobin is the protein inside red blood cells that carries oxygen around the body, and it is relevant here because the heart's workload depends partly on how much oxygen each unit of blood can deliver. When hemoglobin is low, the heart compensates by moving more blood per minute, and breathlessness and fatigue can follow even when the scan looks unremarkable.
That makes it a useful companion result rather than a heart measurement. A clinician reading a scan report alongside a low hemoglobin value has a different set of questions to ask than one reading the scan on its own. What the marker is in full, how it is measured, what high and low values may reflect and how results should be interpreted are covered on its own page.
The markers that pair best with a heart ultrasound are the ones describing oxygen carrying capacity, kidney function, thyroid status and chamber wall stretch, because each changes how the scan should be read.
A blood marker released when the heart's chambers are stretched by pressure or volume is often checked alongside the scan, and it is used as a supporting piece of information rather than a stand-alone answer. Kidney function matters because the kidneys and the heart share fluid balance, and creatinine is the routine way it is estimated. Thyroid markers are checked because thyroid status influences heart rate and the heart's workload. Iron markers are sometimes added when oxygen carrying capacity is in question.
| Marker | Lab reference range | FitScript optimal range |
|---|---|---|
| Hemoglobin, men | As printed on your lab report | 14 to 16 g/dL |
| Hemoglobin, women | As printed on your lab report | 12 to 15 g/dL |
Lab ranges vary by laboratory, age and sex, so read your own report against the range printed on it. FitScript's optimal ranges are optimization targets, not diagnostic cut-offs. FitScript's membership is built around 150+ biomarkers tested per year, with results interpreted by Atlas, FitScript's AI health advisor, and any treatment decision made by a licensed provider.
Every report is worth discussing with the clinician who ordered it, including a normal one, because the value of the scan lies in what it rules in or out for your particular symptoms. Book that conversation rather than reading the summary line alone.
Some findings deserve a prompt call rather than a routine appointment. A report describing a moderate or large collection of fluid around the heart, a markedly reduced ejection fraction, a severe valve finding or a new chamber enlargement all fall into that group. So do new symptoms that arrive while you are waiting for the result, breathlessness at rest, chest pain, fainting, or swelling that worsens over days.
When you do speak to a clinician, three questions cover most of the ground. What did the scan show that explains my symptoms, what did it rule out, and when should it be repeated. Bringing any previous report helps, because a comparison is usually more informative than a single set of numbers.
Findings are described here as observations and possibilities, never as a diagnosis. A single value or a single phrase in a report does not establish a condition, and only a clinician who can combine the images with your history and examination is in a position to say what it means. Treatment decisions belong to a licensed provider. This article is educational and is not medical advice, and you should discuss your results and any treatment with a clinician or licensed provider.
If exertional breathlessness is what prompted the scan, it is worth reading about common shortness of breath causes and how they are told apart. If the swelling in your legs is the part that worries you, swollen ankles causes covers what a clinician looks for. And because the blood marker released when the heart's chambers stretch is frequently checked alongside the scan, what is a bnp blood test explains that test in plain terms.
A standard resting scan commonly takes roughly 30 to 45 minutes from the moment you lie down. The time varies with how easy the images are to obtain and how many measurements the clinician has requested. Allow extra time for changing and for check-in at the department.
No, it is a painless test. You will feel cool gel and firm pressure from the probe against your ribs, and you may be asked to hold your breath for a few seconds at a time. There are no needles and no radiation involved in a standard resting scan.
A routine resting scan needs no fasting and no special preparation beyond wearing a two-piece outfit so only the top needs to come off. Take your usual medicines unless the department tells you otherwise, and ask your prescriber if you are unsure. Other versions of the test, such as a swallowed probe scan, do have preparation rules, which the clinic will explain.
Ejection fraction is the percentage of the blood sitting in the main pumping chamber that is pushed out with each beat. Many laboratories regard roughly 50 percent or above as the normal range for adults, with exact limits differing by sex and method. It is one number among several, and your clinician reads it alongside chamber size, filling measurements and your symptoms.
An ECG records the heart's electrical activity and is the right test for rhythm and conduction questions. A heart ultrasound shows structure and blood flow, including pumping strength, valve motion and chamber size. They answer different questions, which is why the two are often done together.
It cannot see inside the coronary arteries, so it does not show narrowing directly. It can show a consequence, such as a segment of heart muscle that moves less than the segments around it. If coronary narrowing is the question, a clinician will choose a different test to answer it.
The sonographer collects the images, and a clinician reads and reports them afterwards, so results are rarely given on the spot. The wait varies by clinic, so ask at your appointment how and when the report will reach the person who ordered it. Book a follow-up conversation rather than relying on the summary line alone.
A stress echo images the heart at rest and again while it is working harder, either with exercise or with a supervised method the clinician chooses, so the two states can be compared. It is used when the resting pictures leave a question about how the heart behaves under load. A licensed provider decides whether it is appropriate and supervises it.