Kidney Stone Tests: CT, Ultrasound and Urine Workup

Kidney Stone Tests: CT, Ultrasound and Urine Workup

Flank pain with a fever or chills, or being unable to pee at all, needs emergency care now. Call 911 or go to the nearest emergency department instead of waiting for a scheduled appointment.

What does a CT scan show when a stone is suspected?

A stone-protocol CT shows whether a stone is present, where it sits in the kidney or ureter, roughly how large it is, and whether urine is backing up behind it. The scanner passes X-rays through the abdomen from many angles and rebuilds the data into thin cross-sections, so the radiologist can scroll from the top of the kidneys down to the bladder and follow the whole drainage path.

Stones are dense compared with the soft tissue and urine around them, so they stand out as bright points. That density is why CT picks up stone types a plain abdominal X-ray misses, including uric acid stones 1.

The stone is only half the report. The radiologist also looks for secondary signs that the kidney is under pressure, such as swelling of the collecting system (hydronephrosis), a ureter that is wider above the stone than below it, and hazy fat around the kidney. Those findings separate a stone that is sitting quietly from one that is obstructing.

The same scan also covers the rest of the abdomen, so it can point to another explanation when flank pain turns out not to come from a stone at all 1. That matters, because the pain of a stone overlaps with several other causes of one-sided abdominal pain.

What the scan does not do is tell you why the stone formed, or whether you will form another. Those questions belong to urine and blood testing done later, once the acute episode has settled.

Why is a low-dose scan the usual choice?

Low-dose, or reduced-dose, protocols are used because a stone is a high-contrast target that does not need a full-dose image to be found. The scanner is set to deliver less radiation per rotation, and image reconstruction software cleans up the extra graininess that results. The picture looks noisier than a standard abdominal scan, but a bright stone against dark urine survives that noise.

Research suggests that reduced-dose CT keeps high accuracy for detecting ureteral stones while lowering radiation exposure, and multispecialty consensus work on suspected renal colic has recommended using reduced-dose protocols when CT is performed 3. Imaging reviews describe the same direction of travel, with low-dose stone protocols now a standard part of how urinary stone disease is imaged 4.

The trade-off is real but narrow. Lower dose can make very small stones and fine anatomic detail harder to call, and body size influences how well a reduced-dose scan performs, so the radiology department sets the protocol to the person in front of them rather than using one setting for everyone.

European guideline work on urolithiasis positions ultrasound as the initial imaging test and non-contrast CT as the test that confirms a stone when the result will change what happens next 2. In practice, a first episode of severe one-sided flank pain in an adult often ends with a non-contrast CT, because knowing the stone's size and position changes the decision about whether it is likely to pass on its own.

How do CT and ultrasound compare?

CT finds more stones and measures them more precisely; ultrasound involves no radiation and is faster to repeat. Neither is simply better, and the right first test depends on how certain the clinical picture already is.

Low-dose non-contrast CT Ultrasound
What it detects Stones throughout the kidney, ureter and bladder, including uric acid stones 1 Stones in the kidney and near the bladder, plus hydronephrosis; mid-ureteral stones are often hidden by bowel gas
Size and position detail Measures stone size, exact location and density Size can be over-estimated or under-estimated; location is less precise
Radiation Yes, reduced by low-dose protocols 3 None
Where it is done Radiology department, requires a scanner Bedside or clinic, portable machines widely used
Operator dependence Low, the protocol is standardised Higher, results vary with the person scanning and body habitus
Other causes of pain Covers the abdomen and can suggest alternatives 1 Limited view of non-urinary structures
Typical role Confirming a suspected stone when the answer changes management 2 Initial look, follow-up checks and repeat assessments 2
Cost Higher, varies widely by facility and region Lower, varies widely by facility and region

A practical way to hold the two apart is that ultrasound is good at answering "is this kidney obstructed" and CT is good at answering "where exactly is the stone and how big is it". Many people end up having both over the course of one stone episode, which is normal rather than a sign something was missed.

When does ultrasound make more sense first?

Ultrasound makes more sense first when the clinical picture already points strongly to a stone, when someone has formed stones before and knows the pain, and when a clinician wants to limit cumulative radiation across repeated episodes. It is also the easier test to repeat a week later to see whether swelling behind a stone has settled.

Guideline work on urolithiasis places ultrasound as the initial imaging step, with CT reserved for confirmation 2, and consensus work in suspected renal colic has supported an ultrasound-first approach in selected lower-risk adults before any decision about CT 3.

Ultrasound has one trick worth knowing about. On colour Doppler, a stone can produce a shimmering band of colour behind it, called the twinkling artifact, which draws the eye to a stone that is otherwise hard to separate from surrounding tissue. Research suggests that the twinkling artifact may help identify urinary stones on ultrasound 5.

The honest limitation is the middle third of the ureter, where bowel gas sits between the probe and the target. A normal-looking ultrasound does not rule out a stone there. If pain persists, if the ultrasound shows obstruction without a visible stone, or if something about the presentation does not fit, the next step is usually CT rather than watchful waiting.

Which symptoms usually send someone for imaging?

The classic trigger is sudden, severe, one-sided pain that starts in the flank or back and travels toward the lower abdomen and groin, often arriving in waves. People describe pacing, sweating and nausea, and an inability to find a position that helps. Visible or microscopic blood in the urine is common, and when a stone reaches the lower ureter near the bladder, the urge to pee becomes frequent and insistent.

Size and position shape the experience. A stone sitting quietly in the kidney can cause nothing at all and show up incidentally on a scan ordered for another reason. The same stone causes severe pain once it drops into the ureter and stretches it.

The pattern is suggestive but not conclusive, which is exactly why imaging exists. Several other conditions produce one-sided abdominal or flank pain, and the clinician's job in the first hour is to decide how likely a stone is and what else needs excluding. A fuller description of the presentations that lead to testing is covered in kidney stone symptoms.

Two features change the urgency completely. A fever or chills alongside flank pain raises concern about infection sitting behind a blockage, and passing little or no urine raises concern about both kidneys being affected or a bladder outlet problem. Either combination is an emergency and needs same-hour assessment rather than a scheduled scan.

Can a urine test detect kidney stones?

No. A urine test cannot confirm or exclude a kidney stone, and no urine result replaces imaging. What a urine test does is support the picture and flag problems that change the plan.

A standard urinalysis looks at several things at once. Red blood cells are frequently present when a stone is scraping along the ureter, although a meaningful number of people with a confirmed stone have no blood in the urine at all, which is why a clean dipstick does not close the question. White cells, nitrites and leukocyte esterase raise concern about infection, and infection in the presence of a blocked kidney is the combination that needs urgent attention rather than a next-week appointment.

Urine pH adds a clue about chemistry. Urine that stays persistently acidic creates conditions that favour uric acid stones, while persistently alkaline urine points in a different direction. Crystals seen under the microscope can hint at stone type, though crystals alone do not settle composition, and plenty of people pass crystals without ever forming a stone.

So the reasonable way to read a urinalysis during a suspected stone episode is as context. Blood plus typical pain plus a suggestive history raises the likelihood enough that imaging gets ordered; signs of infection move the whole situation up the queue. The urine sample becomes far more informative later, when a full collection is done to understand why a stone formed in the first place.

Which blood tests are drawn alongside imaging?

Blood work during a stone episode is mostly about kidney function, infection and calcium chemistry. Creatinine is a waste product from normal muscle turnover that the kidneys filter out, so a rise above someone's usual level can reflect reduced filtration, including filtration reduced by a blockage, dehydration or other causes. It is interpreted alongside eGFR and the person's baseline rather than read alone, and the dedicated creatinine page covers how it is tested and what shifts it.

Marker Lab range FitScript optimal range
Creatinine, men As printed on your lab report 0.8 to 1.2 mg/dL
Creatinine, women As printed on your lab report 0.6 to 0.9 mg/dL

These are typical lab reference ranges, and ranges vary by lab, age and sex. FitScript's optimal ranges are optimization targets, not diagnostic cut-offs, and a single value outside either column is an observation to discuss, not a conclusion.

The rest of the panel fills in the chemistry. Serum calcium, and sometimes a parathyroid hormone measurement, help a clinician understand whether calcium handling is part of the story. Serum uric acid speaks to the pathway behind uric acid stones. Electrolytes and bicarbonate give a sense of acid handling. A white cell count and an inflammatory marker such as CRP are read when infection is a concern, and those are interpreted qualitatively by the ordering clinician rather than against a tidy target. FitScript's membership includes 150+ biomarkers tested per year, with Atlas, FitScript's AI health advisor, reading each result in the context of the rest of the panel.

What actually happens during the scan?

A stone-protocol CT is short and undramatic. You lie on your back on a moving table, arms above your head, and the table slides through a ring-shaped scanner while you hold your breath for a few seconds. The imaging part usually lasts less than a minute, and most of the appointment is positioning and paperwork.

The scan is normally done plain, meaning without the scan preparations used to highlight blood vessels or the urinary tract in other kinds of imaging. Stones are already dense enough to see, and leaving the scan plain avoids anything bright in the drainage system masking a stone. If a clinician needs to map anatomy before a procedure, a different protocol may be arranged, and that decision belongs to the ordering clinician and the radiologist.

Preparation is minimal. There is usually no fasting requirement for a plain stone scan, and no bowel preparation. You will be asked to remove metal from the scan area, such as a belt, zips or jewellery, because metal creates streaks across the image.

Tell the team if you might be able to become pregnant, if you have any implanted device, and if you have had recent imaging elsewhere, since prior scans give the radiologist a comparison point. Afterwards you can eat, drink and drive as normal, and the images go to a radiologist who issues a written report to the clinician who ordered it.

How do you read what the report says?

Four details carry most of the meaning in a stone report, which are size, location, density and whether there is obstruction.

Size is reported in millimetres, usually as the largest dimension. Location is given as upper, middle or lower ureter, a named part of the kidney, or the bladder. Together those two determine how a clinician thinks about the stone's likely path, and guideline work on conservative management of urolithiasis frames decisions around stone size and position 2.

Density is reported in Hounsfield units, a measure of how strongly the stone blocks X-rays. Harder, denser stones behave differently from softer ones during stone removal procedures, so the number is part of planning rather than something you act on yourself.

Obstruction is the clinical urgency marker. Phrases such as hydronephrosis, ureteral dilatation and perinephric stranding mean urine is not draining freely past the stone. A small non-obstructing stone in the kidney and a similar-sized stone wedged in the ureter with upstream swelling are very different situations.

Read it as observation, then meaning, then next step. The observation is the measurement on the report. The meaning is what it may reflect about drainage and the stone's likely behaviour. The next step is a conversation with the clinician who ordered the scan about monitoring, pain control, hydration, or referral for stone removal. Treatment decisions belong to a licensed provider who has reviewed the whole picture.

What can imaging not tell you?

Imaging tells you about the stone that exists; it does not tell you much about why it formed. Composition is the clearest example. A conventional non-contrast scan gives density, which hints at stone type but does not settle it, and knowing whether a stone is calcium oxalate, calcium phosphate, uric acid, struvite or cystine changes what prevention looks like.

Dual-energy CT narrows that gap by scanning at two X-ray energies, which lets the scanner characterise material rather than just measure brightness, and imaging reviews describe dual-energy techniques as useful for separating uric acid stones from calcium-containing stones 4. That capability is not available everywhere, and it informs rather than replaces laboratory analysis of a stone you actually catch.

The second gap is metabolic. No scan measures urine volume, urine calcium, oxalate, citrate, uric acid or sodium, and those are the variables that explain recurrence. A scan that shows three stones in one kidney does not say whether the cause is low fluid intake, dietary pattern, a chemistry problem or some combination.

The third gap is time. A single scan is a snapshot. Stones grow, move and sometimes pass between one scan and the next, and a stone seen last year may not be the stone causing pain today.

This is why the full workup has three legs, which are imaging for the stone, laboratory analysis for the composition, and urine collection for the chemistry behind it.

What should you do if you catch the stone?

Keep it, dry it and bring it in. A passed stone is the single most informative sample in the whole workup, because laboratory analysis identifies its composition directly rather than inferring it.

Practically, that means peeing through a strainer or a fine mesh filter for as long as the clinician advises, checking the strainer each time, and transferring anything you catch into a dry container. Do not store it in water or any liquid, and do not tape it to paper, because moisture and adhesive both interfere with analysis. Stones can be small and gritty, so a grain the size of a sesame seed is still worth keeping.

The laboratory reports the stone's mineral makeup, often as percentages of more than one component. Calcium oxalate is the most common group, calcium phosphate behaves differently in the urine chemistry that favours it, uric acid stones form in persistently acidic urine, struvite stones are tied to particular urinary infections, and cystine stones reflect an inherited transport problem. Each of those points prevention in a different direction, which is why the composition result is worth the inconvenience of straining.

If you have had a uric acid stone, the chemistry behind it is worth understanding on its own terms, and what causes uric acid kidney stones covers that pathway. If no stone is ever caught, the urine collection described next becomes the main route to the same information.

Why does a 24-hour urine collection matter after a stone?

A 24-hour urine collection measures what your kidneys actually excrete across a full day, which is the closest thing to a direct readout of stone risk. You collect every void into a supplied container over one complete day, keep it as instructed, and the laboratory reports total volume along with calcium, oxalate, citrate, uric acid, sodium, magnesium, pH and creatinine, the last of which is used to check the collection was complete.

The pattern is what matters. Low total volume concentrates everything and raises the chance of crystals forming. High urinary calcium, low citrate, which normally binds calcium and keeps it in solution, high oxalate, high sodium and persistently low pH each push in a specific direction, and together they explain far more than any single blood value can.

Not everyone needs one after a first stone. European work on the metabolic work-up of patients with urolithiasis sets out indications and a diagnostic algorithm for deciding who should have a full metabolic evaluation, with recurrent stone formers and those with higher-risk features prioritised 6.

Timing matters too. The collection is usually done once the acute episode has settled and you are back to your ordinary eating and drinking, because a day of hospital fluids or a day of eating nothing produces a result that describes that day rather than your life. Many clinicians repeat the collection later to see whether changes made a measurable difference.

What makes another stone more likely?

Recurrence is driven mostly by urine chemistry, and urine chemistry is driven by fluid intake, diet, body composition, genetics and certain medical conditions. Low urine volume is the most consistent contributor, because everything dissolved in urine becomes more concentrated as volume falls.

Diet acts through the same chemistry. High sodium intake increases calcium loss into urine, very high animal protein intake lowers citrate and acidifies urine, and oxalate-rich foods matter more in some people than others. Calcium intake is the counterintuitive one, since adequate dietary calcium at meals binds oxalate in the gut rather than driving stones. The practical version of all this is covered in a kidney stone diet.

Bone and stone chemistry overlap more than most people expect. Calcium nephrolithiasis is associated with bone demineralization, and urinary calcium loss sits on the pathway connecting the two 7. That is one reason a clinician may look at calcium handling and bone health together in a repeat stone former rather than looking at the kidney alone.

Other contributors include a family history of stones, conditions affecting parathyroid or gut absorption, recurrent urinary infections, inherited transport disorders and reduced mobility. Some medicines also shift urine chemistry, and whether any of yours are relevant is a question for your prescriber rather than something to adjust on your own.

Will you need repeat imaging later?

Sometimes, and for two different reasons. The first is short term, to check that an obstruction has resolved and the stone has moved or passed, which is often done with ultrasound rather than another CT. The second is longer term surveillance, because stone disease recurs and a new stone can grow silently in the kidney before it causes pain.

How long that surveillance should continue is not fixed. A European guideline panel review of follow-up after surgical or medical intervention for urolithiasis examined how long imaging follow-up should run and when patients can be discharged from it, and found that practice varies and that stone events continue to occur over years of follow-up 8.

In practice, someone with a single passed stone, a clean metabolic workup and good fluid habits is monitored differently from someone with bilateral stones, an inherited stone type or residual fragments after a procedure.

If you are offered a follow-up scan, it is reasonable to ask what question it is meant to answer and what would change based on the result.

When is it worth talking to a clinician?

Any severe one-sided flank pain that is new deserves same-day assessment, because the main decisions about imaging and pain control are time-sensitive. Fever or chills with flank pain, or being unable to pee, needs emergency care immediately rather than a clinic appointment.

Less urgently, it is worth a conversation when you have passed more than one stone, when a scan has shown stones you did not know about, when a creatinine result has drifted from your usual level, or when you have a family history and want to know your own urine chemistry before anything hurts. The questions that get answered in that conversation are what the stone was made of, what your urine looks like over a full day, and which specific lever is worth pulling in your case.

Bring what you have, which is the imaging report, any stone you caught, prior laboratory results and a list of everything you take, including over-the-counter items, so your prescriber can review them. Treatment decisions belong to a licensed provider who has evaluated your history, your imaging and your laboratory results.

This article is educational and is not medical advice. Discuss your results, your imaging and any treatment with a clinician or licensed provider who knows your full history.

Key takeaways

References

  1. Imaging in Urolithiasis. Radiologic Clinics of North America, 2017.
  2. EAU Guidelines on Diagnosis and Conservative Management of Urolithiasis. European Urology, 2016.
  3. Imaging in Suspected Renal Colic: Systematic Review of the Literature and Multispecialty Consensus. Annals of Emergency Medicine, 2019.
  4. Imaging in Urolithiasis. The Urologic Clinics of North America, 2025.
  5. Diagnostic accuracy of Doppler twinkling artifact for identifying urolithiasis: a systematic review and meta-analysis. Journal of Ultrasound, 2023.
  6. Metabolic Work-up of Patients with Urolithiasis: Indications and Diagnostic Algorithm. European Urology Focus, 2017.
  7. Calcium nephrolithiasis and bone demineralization: pathophysiology, diagnosis, and medical management. Current Opinion in Urology, 2014.
  8. Duration of Follow-up and Timing of Discharge from Imaging Follow-up, in Adult Patients with Urolithiasis After Surgical or Medical Intervention: A Systematic Review and Meta-analysis from the European Association of Urology Guideline Panel on Urolithiasis. European Urology Focus, 2023.

Common questions

Do I always need a CT scan to confirm a kidney stone?

No. Many stone episodes are assessed first with ultrasound, especially in someone who has passed stones before and recognises the pain. A CT is usually ordered when the diagnosis is unclear, when the stone's exact size and position will change what happens next, or when another cause of the pain needs excluding. The clinician seeing you decides which test fits your situation.

How much radiation is involved in a stone CT?

A stone-protocol CT uses X-rays, so there is radiation exposure, but most centres now use low-dose settings because a dense stone is easy to see on a noisier image. The exact amount depends on the scanner, the protocol and your body size, so ask the radiology team what protocol they use. If you have had several scans already, tell the ordering clinician so it can be factored in.

Can an ultrasound miss a kidney stone?

Yes. The middle part of the ureter is often hidden behind bowel gas, so a stone there can be invisible on ultrasound even when the kidney above it looks swollen. A normal ultrasound therefore does not rule out a stone. If pain continues or something does not add up, the next step is usually a CT scan rather than waiting.

Can a urine test alone detect kidney stones?

No. A urinalysis can show blood, crystals, urine pH and signs of infection, all of which support or weaken the suspicion of a stone, but none of them confirm one. Some people with a confirmed stone have no blood in the urine at all. Imaging is what confirms whether a stone is present and where it sits.

Do I need to prepare for a stone-protocol CT scan?

Usually very little. A plain stone scan is normally done without fasting or bowel preparation, and the imaging itself takes under a minute while you hold your breath. You will be asked to remove metal items from the scan area, since zips and jewellery create streaks on the image. Mention any implanted device and any recent imaging done elsewhere.

What should I do if I pass a stone at home?

Keep it. Pee through a strainer or fine mesh for as long as your clinician advises, and put anything you catch into a dry container rather than into water. Even a gritty fragment the size of a sesame seed can be analysed. The composition result is what guides prevention, so bring it to your next appointment.

What is a 24-hour urine collection and who needs one?

It is a full day's urine collected into a supplied container so the laboratory can measure total volume along with calcium, oxalate, citrate, uric acid, sodium and pH. It shows the chemistry behind stone formation in a way no single blood test can. It is most often arranged for people who have formed more than one stone or who have higher-risk features, and a clinician decides whether and when to do it.

When is kidney stone pain an emergency?

Flank pain with a fever or chills, or being unable to pee at all, needs emergency care right away. Call 911 or go to the nearest emergency department. Uncontrollable vomiting, fainting, or pain that no position relieves also warrants urgent assessment rather than waiting for a scheduled scan.

Related reading