Nuclear Stress Test: What It Shows and What to Expect

Nuclear Stress Test: What It Shows and What to Expect

Chest pain at rest, chest pressure that does not ease, sudden severe breathlessness, fainting, or pain spreading to the arm, neck or jaw are emergency signs. Call 911 or go to the emergency department.

What is this scan, and how does it work?

It is an imaging test, known in hospitals as myocardial perfusion imaging, that uses a small amount of a radioactive scan preparation and a specialised camera to map how blood reaches the heart muscle, first with the heart at rest and then with the heart working hard.

The scan preparation is given through a vein in the arm. It travels in the bloodstream and collects in heart muscle cells roughly in proportion to how much blood those cells receive. The camera picks up the signal coming from the chest and builds a picture of the muscle in slices. Regions getting a full share of blood produce a strong signal. Regions getting less produce a weaker one.

Doing this twice is the entire point of the test. At rest, most hearts manage to send enough blood to every part of the muscle, even when an artery is partly narrowed, because demand is low. When demand rises, the narrowed path cannot keep up, and the region it supplies shows a weaker signal on the stress pictures than on the resting ones. The comparison between the two sets of images, not either set on its own, is what the reader of the scan is looking at.

The word nuclear describes the camera and the scan preparation, not the heart. Two camera types are in common use, single photon emission computed tomography (SPECT) and positron emission tomography (PET), and the choice depends on the equipment available and the question being asked. Research suggests that perfusion imaging remains a central tool for assessing blood supply to the heart muscle, with continuing attention to image quality and radiation exposure 1.

Why would a clinician order this test?

The usual reason is to find out whether symptoms, examination findings or earlier test results point to a part of the heart muscle that does not receive enough blood when demand rises.

Common situations where the test is considered include:

The test is also used to look ahead, not only to explain today's symptoms.

Whether this scan is the right test, and which version of it, is a decision for the clinician who knows your history, your symptoms and your previous results. It is not a test a person orders for general reassurance, and it answers a narrow question rather than a broad one about heart health.

What does the scan show, and what does it miss?

It shows how blood is distributed through the heart muscle at rest and under stress, and from the same pictures it usually also gives an estimate of how strongly the heart is squeezing and how large its chambers are.

The patterns a reader looks for, described in plain words:

What the scan does not do matters just as much. It does not photograph the artery wall, so it cannot describe plaque, its composition or how much of it there is. It does not measure anything in the blood, so it says nothing about cholesterol, blood sugar or inflammation markers. It is a snapshot taken on one day under one set of conditions, and a normal result does not mean that risk is zero or that nothing needs attention. A scan is read alongside symptoms, history, examination and other tests by the clinician who ordered it, and no single image names a condition on its own.

How is the heart stressed if walking on a treadmill is not an option?

There are two routes, exercise or a heart-stimulating medicine given through the vein by the team, and the clinician chooses based on whether you can exercise hard enough and on what else is going on.

Exercise stress Medicine stress
How demand rises You walk on a treadmill or pedal a bike while the workload increases step by step A medicine given by the team changes blood flow or heart work for a short period
Suited to People able to walk or cycle to a reasonable workload safely People who cannot exercise enough because of joints, balance, breathing or other limits
Extra information How long you lasted, your symptoms, your blood pressure response and the electrical tracing during effort Mainly the flow images themselves, with monitoring throughout
What it feels like Breathlessness, warm muscles, tiredness, sometimes chest discomfort Short lived flushing, headache, a racing or thumping feeling, breathlessness or chest discomfort in some people
Preparation point Follow the centre's instructions on food and medicines Centres usually ask for a period without caffeine beforehand, because caffeine can interfere with how the medicine works

Exercise is often preferred when it is possible, because the effort itself produces information that no injection can give, such as how far you can go and what your blood pressure does along the way. If exercise is not realistic, the medicine route reaches a similar imaging goal without the walking. If you take anything regularly, ask your prescriber which medicines to continue before the appointment, because some medicines blunt the heart's response to stress. Treatment decisions belong to a licensed provider.

What happens on the day, step by step?

The visit is built around two imaging sessions with a stress phase and a waiting period in between, and most of your time is spent waiting rather than being imaged.

  1. Check in and preparation. You change into a gown, the team confirms your history and medicines, and a thin plastic line is placed in a vein in your arm.
  2. Monitoring is attached. Small sticky electrodes go on the chest for the electrical tracing, and a blood pressure cuff goes on the arm. Chest hair may need to be shaved in small patches so the electrodes stick.
  3. The first set of images. Depending on the protocol, the resting images are taken first, or the stress images are taken first. The scan preparation is given through the vein, then there is a wait while it distributes, then you lie on a narrow bed with the camera close to your chest, often with your arms above your head, and stay still for the imaging.
  4. The stress phase. You either exercise with increasing workload until a target is reached or symptoms stop you, or the team gives the heart-stimulating medicine while watching your rhythm, blood pressure and symptoms. A second portion of scan preparation is given near peak stress.
  5. The second set of images. After another waiting period, you are imaged again so the two sets can be compared.
  6. Going home. The line is removed, the team checks you are back to baseline, and the images go to a reader and then to the clinician who ordered the test.

Not every visit includes both sets. Research suggests that when the stress images are normal, a stress-first approach can allow the resting images to be skipped, which shortens the visit and lowers exposure 3.

Related: Stress Echocardiogram: Heart Ultrasound During Exercise

How should you prepare for the appointment?

Follow the written instructions your centre gives you, because preparation differs between protocols and equipment, and the instructions you receive override any general description.

That said, the same themes come up almost everywhere:

If you develop new symptoms before the appointment, such as chest pain at rest or breathlessness that is worse than usual, do not wait for the scheduled scan. Chest pain at rest means calling 911 or going to the emergency department.

How long does the visit take, and what happens afterwards?

Plan for a longer appointment than the imaging alone would suggest, because waiting between phases is built into every protocol. Your centre can tell you the schedule for the version it uses, and that is a better guide than any general figure.

The length depends on which protocol is used, whether both image sets are needed, how busy the camera is, and whether you exercise or receive the medicine. Studies indicate that stress-first protocols can shorten imaging time and reduce radiation exposure in people whose stress images are normal, because the resting set becomes unnecessary 4.

Afterwards, most people return to normal eating, drinking and activity unless the team says otherwise, and drinking water is usually encouraged. The vein site may bruise for a day or two. If the medicine route was used, any flushing, headache or chest discomfort generally settles before you leave, and the team will not discharge you until your readings are back to baseline.

Images are read by a specialist and reported to the clinician who ordered the test. Ask before you leave who will contact you with the result and how, because that varies between centres and is worth knowing rather than guessing. If new symptoms appear after you get home, contact your clinician, and if chest pain at rest, fainting or severe breathlessness occurs, call 911 or go to the emergency department.

How much radiation is involved?

The test uses a small amount of radiation, on the same general scale as other medical imaging tests, and the exact amount depends on the camera, the protocol and the scan preparation chosen for your appointment. Your imaging team can tell you the amount used in your case, and that is the number worth asking for rather than a figure from a general article.

Exposure has been a focus of practice in this field for years. Research suggests that perfusion imaging practice has continued to work on reducing exposure while keeping image quality usable 1. One of the clearest ways to do that is the stress-first approach, where imaging starts with the stress pictures. Studies suggest that when those pictures are normal, the resting set can be left out, so the person receives less total exposure and spends less time in the department 5.

The practical framing is a trade. Radiation is a real consideration, and so is the information the scan provides when the question it answers would otherwise stay open. That balance is weighed by the clinician ordering the test against your symptoms and history, which is also why the test is not used as a routine screen in people without a reason for it. If you have had several imaging tests recently, say so, because it is relevant to the discussion.

What are the risks and side effects?

Most people get through the appointment without difficulty, and the risks that exist belong mainly to the stress phase rather than to the imaging, which is why the whole test is done in a monitored setting with trained staff and resuscitation equipment nearby.

During exercise stress, you can expect breathlessness, tired legs and a thumping heartbeat, and some people get chest discomfort, which is itself information the team records. During medicine stress, people describe flushing, a warm feeling spreading through the body, headache, nausea, a racing or thumping heart, breathlessness or chest discomfort. These sensations are short lived, and the team can stop the medicine and give something to settle the effects if needed.

Other points worth knowing:

After you leave, chest pain at rest, chest pressure that does not ease, severe breathlessness, fainting or pain spreading to the arm, neck or jaw means calling 911 or going to the emergency department. For milder things, such as a sore arm, a lingering headache or questions about what you felt during the test, contact the clinician who ordered the scan.

What do the results mean, and what happens next?

A result describes how blood was distributed in the heart muscle on the day of the test, and the meaning comes from reading that picture together with your symptoms, your history and your other results.

A normal result. Observation, the signal was even across the muscle at rest and under stress. Possible meaning, blood reached all regions adequately under the conditions of that test. Next step, this is reassuring about flow on that day, and it does not speak to cholesterol, blood pressure, blood sugar or anything else that is measured in blood or at the cuff.

Reduced signal under stress that normalises at rest. Observation, one or more regions look dimmer only on the stress images. Possible meaning, flow to that region may be limited when demand rises. Next step, this is worth discussing with the clinician who ordered the test promptly, since it often shapes what comes next.

Reduced signal on both sets. Observation, the same region looks dim at rest and under stress. Possible meaning, this may reflect muscle damaged in the past or a long standing reduction in flow. Next step, the clinician interprets it against your history, including any previous cardiac events.

An equivocal or technically limited result. Observation, the reader cannot say confidently whether a dim area is real. Possible meaning, attenuation from body tissue, movement during imaging or other technical factors. Next step, repeat imaging, a different camera type or a different test altogether. Studies indicate that both SPECT and PET perfusion imaging are used in people whose computed tomography findings are equivocal, with differences in image quality and in the ability to quantify flow 6.

No single scan tells you that you have a specific condition, and nobody should read their own images as a diagnosis. Bring the report to the clinician who ordered it and ask what the finding changes.

How does it compare with other common heart tests?

It differs from the alternatives in what it measures, with perfusion imaging looking at blood distribution in the muscle while other tests look at electrical activity, wall motion or the anatomy of the arteries themselves.

Test What it looks at How stress is applied Notes
Exercise electrocardiogram Electrical tracing and symptoms during effort Treadmill or bike No imaging of the muscle or arteries
Stress echocardiography Movement of the heart walls using ultrasound Exercise or a medicine given by the team No radiation, image quality depends on the ultrasound window
Nuclear perfusion imaging Distribution of blood flow into the muscle at rest and stress Exercise or a medicine given by the team Uses a radioactive scan preparation
Computed tomography of the coronary arteries Anatomy of the arteries themselves None, imaging at rest Answers an anatomical question rather than a flow question

The choice is not a ranking, it is a match between the question and the tool. When an anatomical test leaves an uncertain answer, a flow test may be added, and studies indicate that SPECT and PET are both used in that situation 6. Ask the clinician why this test rather than another, because the reasoning is usually specific to your case.

When might this not be the right test?

It is not the right test when the answer would not change anything, when symptoms need emergency care instead, or when the question being asked is about something the scan cannot measure.

Situations where another route makes more sense:

If a scan has been suggested and you are unsure why, the useful question is simple. What will this result change? A clinician should be able to answer that in one or two sentences, and if the answer is clear, the test is usually worth doing.

Where does cholesterol testing fit alongside imaging?

The two answer different questions and neither replaces the other. A perfusion scan shows how blood is moving through the heart muscle on the day of the test. A lipid panel looks at particles circulating in the blood that relate to how arteries change over years.

LDL Cholesterol is one of those measures, and the dedicated guide covers what it is, how it is measured, how its ranges are read and what a higher or lower result may reflect. That page is the place for the detail, and this one stays on the scan.

In practice, a person may have a normal perfusion scan and a lipid result their clinician wants to work on, or the reverse. Reading imaging and bloodwork together is the point, and the clinician who ordered either one is the person to interpret both.

Which other markers are worth looking at alongside?

The markers usually reviewed alongside heart imaging are the ones that describe long term cardiometabolic risk rather than today's blood flow.

Marker Lab's own range FitScript optimal range
LDL Cholesterol As printed on your lab report 50 to 100 mg/dL

Optimal ranges are FitScript's optimization targets, not diagnostic cut-offs. Lab reference ranges vary by lab, age and sex, which is why the lab's own range belongs on your report rather than in an article.

Other measures a clinician may look at in the same review, described here in words rather than numbers, include apolipoprotein B and lipoprotein(a) as particle-based views of the lipid picture, triglycerides and HDL cholesterol, HbA1c along with fasting glucose and insulin for blood sugar handling, high sensitivity C-reactive protein as a general inflammation signal, and kidney and thyroid panels because both influence how other results are read. Blood pressure, weight trend and sleep quality sit alongside the labs and are tracked without a blood draw.

FitScript's membership covers 150+ biomarkers tested per year, with interpretation by Atlas, FitScript's AI health advisor, and any treatment decision reviewed by a licensed provider. Numbers only become useful when someone reads them against your symptoms, your history and, where relevant, your imaging.

When is it time to talk to a clinician?

Any emergency sign means emergency care. Chest pain at rest, chest pressure or tightness that does not ease, pain spreading to the arm, neck, jaw or back, sudden severe breathlessness, fainting, or a cold sweat with chest discomfort means calling 911 or going to the emergency department.

Book a conversation with your clinician, rather than an emergency visit, for things like new chest discomfort or breathlessness that appears with exertion and settles with rest, a drop in how far you can walk before symptoms start, a scan report you do not understand, or questions about preparation, including which of your medicines to continue. Some medicines affect how the heart responds to stress, so ask your prescriber rather than deciding on your own.

If a result sits outside the range on your report, that is a reason to ask what it means in your context, not a reason to ignore it and not a diagnosis by itself. Discuss your results and any treatment with a clinician or licensed provider, who is the person able to decide what is appropriate for you.

This page is educational and is not medical advice.

Key takeaways

References

  1. Myocardial perfusion imaging: Lessons learned and work to be done-update. Journal of Nuclear Cardiology, 2018.
  2. Stress-First Myocardial Perfusion Imaging. Cardiology Clinics, 2023.
  3. Stress-first Myocardial Perfusion Imaging. Cardiology Clinics, 2016.
  4. Stress-First Myocardial Perfusion Imaging. Heart Failure Clinics, 2025.
  5. SPECT Versus PET Myocardial Perfusion Imaging in Patients with Equivocal CT. Current Cardiology Reports, 2020.
  6. Outcomes after inappropriate nuclear myocardial perfusion imaging: A meta-analysis. Journal of Nuclear Cardiology, 2016.

Common questions

Does a nuclear stress test hurt?

The main discomfort is the small needle used to place a line in a vein in your arm. During the stress phase you may feel breathless, warm, flushed or aware of your heartbeat, and some people get a headache or chest discomfort that settles quickly. Lying still with your arms raised during imaging is the part most people find awkward, so tell the team in advance if your shoulders or back make that difficult.

Can I drink coffee before the test?

Centres usually ask you to avoid caffeine for a set period beforehand, including coffee, tea, cola, energy drinks, chocolate and decaffeinated versions, because caffeine can interfere with the medicine route used to stress the heart. Follow the written instructions your centre gives you, since the required period differs between protocols. If you slip up, tell the team rather than staying quiet, because the appointment may need rescheduling.

Should I stop my usual medicines before the appointment?

Do not stop anything on your own. Some medicines are held before this test and some are not, so ask your prescriber well before the appointment and bring a current list with you on the day. The team will confirm what you took that morning before the test begins.

Do I have to run on a treadmill?

No. If you cannot walk or cycle hard enough because of joints, balance, breathing or other limits, the team can stress the heart with a medicine given through the vein instead. The imaging part is the same either way. The clinician decides which route suits you after reviewing your history.

Is the radiation from the scan something to worry about?

The amount used is small and sits on the same general scale as other medical imaging tests, and it varies with the camera, the protocol and the scan preparation used at your appointment. Ask your imaging team what was used in your case rather than relying on a general figure. If you have had several imaging tests recently, mention it, because that is part of the discussion about whether the scan is worth doing.

Can I drive myself home afterwards?

Most people can, because sedation is not part of a routine appointment. If the team plans anything to help you relax, they will tell you in advance and ask you to arrange a ride. Check with your centre when you book, since policies differ.

What happens if the result is abnormal?

An abnormal pattern describes how blood was distributed in the heart muscle on the day of the test; it is not a diagnosis by itself. The clinician who ordered the scan reads it alongside your symptoms, history and other results, and decides whether more testing or a change in care is needed. If your report shows a finding outside the expected range, discuss it with that clinician promptly rather than waiting for a routine review.

Does this scan replace a cholesterol blood test?

No. The scan looks at blood flow through the heart muscle on one day, while a lipid panel measures particles circulating in the blood that relate to how arteries change over years. They answer different questions and are often reviewed together. A clinician decides which tests make sense for you.

Related reading